2020 High quality Bench Lcr Meter - ET1092 Series Benchtop High Frequency LCRMeter, LCR Bridge – Zhongchuang
2020 High quality Bench Lcr Meter - ET1092 Series Benchtop High Frequency LCRMeter, LCR Bridge – Zhongchuang Detail:
¤ 0.05% basic accuracy.
¤ Measuring speed up to 200 times per second.
¤ 10Hz-1MHz Frequency Measurement Range, Continuous Adjustable, 1mHz Step.
¤ Test signal level 10 mV-2 V adjustable, 1 mV step-by-step.
¤ Internal Programmable DC Bias Voltage-2V~+2V.
¤ Supporting external DC bias voltage-60V~+60V.
¤ Supporting external current source.
¤ Automatic Level Adjustment of Voltage or Current.
¤ V, I and other test signal monitoring functions.
¤ 10-Point List Scanning Test Function.
¤ 10-grade sorting and counting function.
¤ 100 sets of self-calibration data.
¤ Automatic and manual range.
¤ 7 inch LCD display, Chinese and English interface.
¤ USB, LAN, RS232, GPIB, HANDLER interfaces.
¤ Passive components: capacitors, inductors, magnetic cores, resistors, piezoelectric devices, transformers, chip components and network components impedance parameter evaluation and performance analysis.
¤ Semiconductor components: C-VDC characteristics of varactor diodes; parasitic parameter analysis of transistors or integrated circuits.
¤ Other Components: Impedance Evaluation of Printed Circuit Board, Relay, Switch, Cable, Battery, etc.
¤ Dielectric materials: dielectric constant and loss angle of plastics, ceramics and other materials evaluation of magnetic materials: permeability and loss angle evaluation of ferrites, amorphous and other magnetic materials.
¤ Semiconductor Materials: Dielectric Constants, Conductivity and C-V Properties of Semiconductor Materials.
¤ Liquid Crystal Materials: C-V Characteristics of Dielectric Constants and Elastic Constants of Liquid Crystal Units.
¤ Electronic capacitors, substrates, PCB, antennas, ferrites, shock absorbers, SAR phantom materials.
¤ Aerospace/National Defense Stealth, RAM (Radar Wave Absorbing Material), Radome.
¤ Industrial Material Ceramics and Composites Automotive Parts and Coatings.
¤ Polymers and Plastic Fibers, Films, Insulating Materials.
¤ Hydrogel disposable diapers and soft contact lenses.
¤ Liquid crystal display.
¤ Other products containing such materials such as tyres, coatings, adhesives, etc.
¤ Study on Fresh Preservation (Deterioration) of Food and Agricultural Food, Microwave Food Development, Packaging and
Moisture Content Measurement.
¤ Water Content Measurement and Oil Content Analysis of Wood/Paper Products in Forestry and Mining Industry.
¤ Pharmaceutical and medical drug research and production, biological implants, human tissue characterization, biomass, fermentation.
Model |
ET1092E |
ET1092D |
ET1092C |
ET1092B |
ET1092A |
Test signal frequency range |
10Hz-1MHz |
10Hz-500kHz |
10Hz-300kHz |
10Hz-200kHz |
10Hz-100kHz |
Frequency Resolution and Accuracy |
Resolution 1 mHz, accuracy 0.01% |
||||
Test parameters |
Cp-D,Cp-Q,Cp-G,Cp-Rp,Cs-D,Cs-Q,Cs-Rs, Lp-D,Lp-Q,Lp-G,Lp-Rp,Ls-D,Ls-Q,Ls-Rs, Rs-Xs,|Z|-θr,|Z|-θd,|Y|-θr,|Y|-θd,G-B |
||||
Measuring display speed (> 100Hz) |
Fast 50 times per second (20ms), moderate 10 times per second (100ms), slow 1.25 times per second (800ms) |
||||
Customized measurement speed(> 1kHz) |
It can be set between 0.5 times per second and 200 times per second |
||||
LCR parameter display range |
Cp、Cs:0.001000pF~99.9999F Lp、Ls:0.001000nH~99.9999kH Rp、Rs、|Z|、Xs:0.001000mΩ~999.999MΩ G、B、|Y|:0.001000μS~999.999kS θr:±0.000001rad~3.14159rad θd:±0.000001deg~179.9999deg D:±0.000001~9.99999 Q:±0.001~99999.9 |
||||
Test signal voltage range |
0~2Vrms |
||||
Voltage Resolution and Accuracy |
Resolution 1 mV, accuracy 5%+5 mV |
||||
Test signal current range |
100μArms~20mArms |
||||
Current Resolution and Accuracy |
Resolution 10 μA, Accuracy 5%+50 μA |
||||
DC bias voltage source
|
Internal: – 2V ~+2V voltage bias, – 20mA ~+20mA current bias |
||||
External: – 60V ~+60V Voltage Bias |
|||||
Internal resistance of signal source |
30 ohms, 100 ohms optional |
||||
Basic accuracy |
0.05% |
||||
Display resolution |
6 1/2 digit |
||||
comparator |
8 combination, 1 unqualified and 1 subsidiary |
||||
Trigger mode |
Internal, manual, external, bus |
||||
Mathematical operations |
Delta (absolute value), Delta (percentage), direct reading |
||||
Calibration function |
Self-Calibration, Open Circuit, Short Circuit, Load, 100 Sets of Self-Setting Frequency Points |
||||
List scanning |
10-Point List Scanning Test |
||||
Storage device |
Internal /USB memory |
||||
Interface |
GPIB、LAN、RS232、USB Host、USB Device、Handler,(3501 GPIB is the choice) |
¤ Power voltage: 220V.AC ±10%, 50Hz,Optional 110V.AC ±10%, 50Hz;
¤ Power consumption: <20W;
¤ Display: 7” TFT LCD, with a resolution of 800*480;
¤ Interfaces: Ethernet, RS232, GPIB, USB and Handler interfaces;
¤ Service environment: 0°C-40°C;
¤ Sizes: 330mm*285mm*136mm (L*W*H);
¤ Weight: 3.6kg.
¤ GPIB Cable (32P01);
¤ Rs232 Serial Port Line (32P04);
¤ USB Data Line (32P05);
¤ 2m/4m test cable (35P01);
¤ SMD patch element test fixture (35P02);
¤ LCR test pen/four-wire patch element test clamp (35P03);
¤ Kelvin Test Clamp (35P04).
¤ Three core power cord(30P04);
¤ Kelvin test clip(35P04)
Product detail pictures:
Related Product Guide:
Our corporation insists all along the quality policy of "product top quality is base of organization survival; purchaser pleasure will be the staring point and ending of an company; persistent improvement is eternal pursuit of staff" plus the consistent purpose of "reputation very first, purchaser first" for 2020 High quality Bench Lcr Meter - ET1092 Series Benchtop High Frequency LCRMeter, LCR Bridge – Zhongchuang , The product will supply to all over the world, such as: Johannesburg, Italy, Nepal, We're your reliable partner in the international markets of our products and solutions. We focus on providing service for our clients as a key element in strengthening our long-term relationships. The continual availability of high grade solutions in combination with our excellent pre- and after-sales service ensures strong competitiveness in an increasingly globalized market. We're willing to cooperate with business friends from at home and abroad, to create a great future. Welcome to Visit our factory. Looking forward to have win-win cooperation with you.
By Kay from Lebanon - 2018.08.12 12:27
As an international trading company, we have numerous partners, but about your company, I just want to say, you are really good, wide range, good quality, reasonable prices, warm and thoughtful service, advanced technology and equipment and workers have professional training, feedback and product update is timely, in short, this is a very pleasant cooperation, and we look forward to the next cooperation!
By John biddlestone from Colombia - 2018.10.31 10:02