2020 wholesale price dual channel functional signal generator - ET33 Series Arbitrary Waveorm Function Signal Generator – Zhongchuang
2020 wholesale price dual channel functional signal generator - ET33 Series Arbitrary Waveorm Function Signal Generator – Zhongchuang Detail:
¤ The 3.5 inch 480×320 TFT LCD screen has a clear graphical interface.
¤ Support menu in Chinese and English.
¤ Dual channel output, maximum output frequency 70MHz.
¤ The two channels are independent of each other and have phase synchronization function.
¤ 160MSa/S sampling rate, 12 bit vertical resolution, 16K storage depth.
¤ Built in 5 basic waveforms and 60 arbitrary waveforms.
¤ Waveform storage: supporting 10 sets of user defined editing waveforms.
¤ The pulse wave output at the edge time can be set.
¤ Internal / external AM, FM, FSK, PM, ASK, PSK modulation function.
¤ Output of linear / logarithmic sweep and pulse train waveform.
¤ High precision frequency meter with 200MHz.
¤ It has RS232 interface, USB Device, USB Host interface, GPIB (optional), supports U disk storage.
¤ Equipped with multi-function arbitrary waveform editing software.
¤ Supply voltage: 220V.AC±10%, or 110V.AC ±10% (optional), 45~65Hz.
¤ Power consumption: <40W.
¤ Display: 3.5 inch TFT LCD screen, resolution 480 x 320, color 16M color.
¤ Temperature range: operating state 10℃ ~+40℃ , non operating -10℃ ~+60℃ .
¤ Chumidity range: 0~40℃, less than 90% relative humidity.
¤ Interface: RS232, USB Host, USB Device, GPIB (matching).
¤ Size: 265 x 105 x 305mm (wide * high * Deep).
¤ Weight:2.6kg.
Matching Accessories
¤ One three-core power cord.
¤ Two power fuses.
¤ 1 user manual.
Optional Accessories
¤ CD.
¤ USB cable.
¤ RS232/485 cable.
¤ The output line.
| Frequency Characteristics | ||||||
|
Model |
ET3310 |
ET3325 |
ET3340 |
ET3360 |
ET3370 |
|
|
Waveform types |
Sine, square, triangle, pulse, noise and arbitrary waves (including DC) |
|||||
|
Sine |
1uHz ~ 10MHz |
1uHz ~ 25MHz |
1uHz ~ 40MHz |
1uHz ~ 60MHz |
1uHz ~ 70MHz |
|
|
Square |
1uHz ~ 5MHz |
1uHz ~ 5MHz |
1uHz ~ 10MHz |
1uHz ~ 10MHz |
1uHz ~ 10MHz |
|
|
Triangle |
1uHz ~ 500kHz |
1uHz ~ 500kHz |
1uHz ~ 1MHz |
1uHz ~ 2MHz |
1uHz ~ 2MHz |
|
|
Noise (-3dB) |
7MHz Bandwidth |
|||||
|
Pulse |
100uHz ~ 5MHz |
100uHz ~ 10MHz |
||||
|
Arbitrary wave |
1uHz ~ 5MHz |
1uHz ~ 10MHz |
||||
|
Frequency Resolution |
1uHz |
|||||
|
Frequency Accuracy |
±5ppm |
|||||
| Sine Wave Characteristics |
CH1 |
CH2 |
||||
|
Harmonic distortion(>1Vpp) |
0~1MHz: <-45dBc;1MHz~10MHz: <-40dBc;10MHz~20MHz: <-30dBc 20MHz~40MHz: <-25dBc;40MHz~70MHz: <-20dBc |
0~1MHz: <-45dBc 1MHz~40MHz: <-40dBc;40MHz~70MHz: <-35dBc |
||||
| Total harmonic distortion |
<0.2% (20Hz-20kHz, 1Vpp) |
|||||
| Square Wave Signal Characteristics | ||||||
|
Rise/fall Time |
<20ns |
|||||
|
Overshoot |
<5% |
|||||
|
Duty cycle |
≤100kHz: 1%~99%;≤5MHz: 20%~80%;≤10MHz: 40%~60% (0.1% resolution) |
|||||
|
Dissymmetry(50% duty cycle) |
1% Period + 5ns |
|||||
|
Jitter |
6ns +0.1% Period |
|||||
| Ramp Wave Characteristics | ||||||
|
Linearity degree |
≤0.1% Peak output |
|||||
|
Symmetry |
0.0~100.0%(resolution 0.1%) |
|||||
| Pulse Wave Characteristics | ||||||
| Pulse width | Min 20ns;1ns resolution | |||||
| Edge transition time | Min 20ns | |||||
| Overshoot | <5% | |||||
| Jitter | 6ns +0.1% Period | |||||
| Arbitrary Wave Characteristics | CH1 | CH12 | ||||
| Sampling speed | 160MSa/S | 160MSa/S | ||||
| Waveform amplitude resolution | 12bits | 10bits | ||||
| Waveform length | 16k | 4k | ||||
| Minimum rise/fall time | <20ns | <20ns | ||||
| Jitter | 6ns+30ppm | 6ns+30ppm | ||||
| Storage quantity | 10 waveforms | 10 waveforms | ||||
| Output Characteristics | ||||||
|
Amplitude (50Ω) |
||||||
|
Range |
1mVpp~10Vpp ≤20MHz;1mVpp~5Vpp >20MHz |
1mVpp~3Vpp ≤20MHz |
||||
|
Accuracy |
±1% set value ±1mVpp(1kHz Sine,0 offset,>10mVpp) |
|||||
|
Resolution |
1mV or 3 bit |
|||||
|
Flatness(relative to 1K Sine, 1 Vpp) |
±0.1dB,≤100kHz;±0.3dB,≤5MHz;±0.4dB,≤25MHz;±1dB,≤70MHz |
±0.1dB,≤100kHz;±0.2dB,≤5MHz;±2dB, ≤40MHz;±5dB,≤70MHz |
||||
|
Offset (50Ω) |
||||||
|
Range |
±5Vpk ,ac + dc |
±1.5Vpk ,ac + dc |
||||
|
Accuracy |
±(1% set value +5mV+0.5% amplitude) |
|||||
|
Output impedance |
50Ω |
|||||
|
Protection |
Short circuit protection, automatically disables the waveform output when overloading |
|||||
| SYNC Output | ||||||
|
Level |
TTL compatibility |
|||||
|
Impedance |
50Ω |
|||||
|
Rise/fall time |
<25ns; |
|||||
|
Maximum frequency |
25MHz |
|||||
| AM Modulation (CH1) | ||||||
|
Carrier wave |
Sine, square, ramp, pulse and arbitrary waveforms (excluding DC) |
|||||
|
Source |
Internal/external |
|||||
|
Modulation wave |
Sine, square, triangle and ramp |
|||||
|
Modulation frequency |
2mHz~20kHz |
|||||
|
Modulation depth |
0%~120% |
|||||
| FM Modulation (CH1) | ||||||
|
Carrier wave |
Sine, square, ramp, pulse and arbitrary waveforms (excluding DC) |
|||||
|
Source |
Internal/external |
|||||
|
Modulation wave |
Sine, square, triangle and ramp |
|||||
|
Modulation frequency |
2mHz~20kHz |
|||||
|
Frequency offset |
0~Maximum carrier frequency |
|||||
| FSK Modulation (CH1) | ||||||
|
Carrier wave |
Sine, square, ramp, pulse or arbitrary waveforms (excluding DC) |
|||||
|
Source |
Internal/external |
|||||
|
Modulation wave |
Square wave of 50% duty ratio |
|||||
|
Keying frequency |
2mHz~1MHz |
|||||
| Frequency Sweep (CH1) | ||||||
|
Carrier wave |
Sine, square, ramp, pulse and arbitrary waveforms (excluding DC) |
|||||
|
Types |
Linearity/Logarithm |
|||||
|
Start/Stop Frequency |
1uHz~Maximum carrier frequency |
|||||
|
Sweep frequency time |
1ms~500s |
|||||
|
Trigger source |
Manual operating, internal, external |
|||||
| Burst characteristics (CH1) | ||||||
|
Carrier wave |
Sine, square, ramp, pulse, noise and arbitrary waveforms (excluding DC) |
|||||
|
Pulse count |
1~65535 or infinite, gated |
|||||
|
Start/stop phase |
0~360° |
|||||
|
Internal period |
1us~500s |
|||||
|
Gating source |
External |
|||||
|
Trigger source |
Internal, external, manual operating |
|||||
| Frequency Meter | ||||||
|
Frequency range |
1Hz~160MHz |
|||||
|
Frequency resolution |
6 bit/s |
|||||
|
Voltage range and sensitivity |
100mVpp~5Vpp |
|||||
|
Input adjustment |
Input impedance:1MΩ |
|||||
|
Coupled modes:AC |
||||||
| Trigger Input | ||||||
|
Level |
TTL compatibility |
|||||
|
Slope |
Rise/Fall |
|||||
|
Pulse width |
>100ns |
|||||
|
Reaction time |
<500ns(burst) |
|||||
|
<10us(sweep frequency) |
||||||
| Modulation Input | ||||||
|
Impedance |
1MΩ |
|||||
|
Signal range |
±5V ac + dc |
|||||
Product detail pictures:
Related Product Guide:
"Sincerity, Innovation, Rigorousness, and Efficiency" is the persistent conception of our firm to the long-term to develop together with consumers for mutual reciprocity and mutual advantage for 2020 wholesale price dual channel functional signal generator - ET33 Series Arbitrary Waveorm Function Signal Generator – Zhongchuang , The product will supply to all over the world, such as: Monaco, Czech Republic, Swaziland, Our company promises: reasonable prices, short production time and satisfactory after-sales service, we also welcome you to visit our factory at any time you want. Wish we have a pleasant and long terms business together!!!
By Matthew Tobias from Bangladesh - 2017.09.30 16:36
We have been engaged in this industry for many years, we appreciate the work attitude and production capacity of the company, this is a reputable and professional manufacturer.
By Marco from Seychelles - 2017.07.07 13:00
Products categories
-
China wholesale Meter Field Calibrator - ET278...
-
Hot New Products battery capacity tester batter...
-
OEM/ODM China Programmable Dc Load - ET54 seri...
-
Good quality Usb Load Tester - ET37 Series Pro...
-
China Cheap price Black Body Temperature Calibr...
-
PriceList for Lcr Meter Bench - ET35 Series Be...