• prduct1

Products

ET33C Dual-channel Function/Arbitrary Waveform Generator

Short Description:

ET3X two-channel function/arbitrary waveform generator is equipped with direct digital synthesis (DDS) technology which enables output signal to be stable and accurate.

 3.5-inch 480×320TFT LCD with clear graphic interface

Chinese / English menu available

 Press key for help and information

 File management supporting USB flash disk and local storage

Two-channel output with the highest output frequency is ET3315X Model is 15MHz,ET3325X Model is 25MHz, ET3340X Model is 40MHz, ET3360X Model is 60MHz.

Sampling rate: 200MSa/S, vertical resolution: 13 bit and storage depth: 8k

5 basic waveforms and 32 arbitrary waveforms in-built

 Pulse wave output set in edge time

Internal/external AM, FM, PM, ASK, FSK and PSK modulation function

Output of linear/logarithmic frequency sweep and burst waveform

 Frequency meter of high precision of 100MHz and 32-bit counter

 With RS232 interface, USB Device, USB Host interface supporting USB flash disk storage (USB Host Optional)

 Multi-functional arbitrary waveform editing software equipped


Product Detail

Product Tags

Products Features Basic function

¤  Measurement/output: voltage, current, resistance, frequency, pulse, switching values, in which the current output supports active and passive;

¤  220V measurement function

¤  200mA AC current measurement function

¤  Simulating RTD and thermocouple through temperature form

¤  Simulating 2-wire transmitter

¤  Resistance measurement options: 2 wires, 3 wires, 4 wires

¤  Accuracy: 0.01%, 0.02%

¤  Two isolated channels support measure and output simultaneously

¤  Providing manual step, automatic step, automatic step and manual step functions.

¤  3.5 TFT LCD screen,resolution rate 480*320

¤  Measurement and output data can be displayed simultaneously or separately;

¤  5000mAh Lithium battery

¤  Automatic power shutdown function, shutdown time can be set, and suitable for on-site use

¤  DC 24V loop power for on -site use

¤  Thermocouple measurement and output provide three kinds of cold junction temperature compensation methods: built-in, external and manual, among them, external reference junction adopts A class Pt100 Platinum resistance, which can correct temperature through inputting certificate value

¤  Thermocouple types: R,S,K,E,J,T,N,B,L,U,XK,WRE325,WRE526;

¤  RTD 

types:PT100-385,PT100-392,PT100-JIS,PT200-385,PT500-385,PT1000-385,Cu10,Cu50,Cu100,Nil20,BA1,BA2,PT10;

Technical Index

Frequency Characteristics
MODEL

ET3315X

ET3325X

ET3340X

ET3360X

Sine

1μHz ~ 15MHz

1μHz ~ 25MHz

1μHz ~ 40MHz

1μHz ~ 60MHz

Square

1μHz ~ 15MHz

1μHz ~ 15MHz

1μHz ~ 15MHz

1μHz ~ 15MHz

Triangle

1μHz ~ 15MHz

1μHz ~ 15MHz

1μHz ~ 15MHz

1μHz ~ 15MHz

Pulse

100μHz ~ 6MHz

100μHz ~ 6MHz

100μHz ~ 6MHz

100μHz ~ 6MHz

Arbitrary

1μHz ~ 6MHz

1μHz ~ 6MHz

1μHz ~ 6MHz

1μHz ~ 6MHz

Noise (-3dB) 7MHz Bandwidth
Frequency Resolution 1μHz
Frequency Accuracy ±5ppm
Frequency Stability ±1ppm/3hour
Frequency Characteristics
Waveform Types Sine, square, triangle, pulse, noise and arbitrary waves (including DC).There are 32 kinds of arbitrary waves and 50 kinds of user-defined waves.
Waveform Length 8192 points
Waveform Sampling Rate 200 MSa/s
Waveform Vertical Resolution 13 bits
Sine Wave Characteristics

Sine Wave

Harmonic Distortion ≥45dBc(<1MHz);≥40dBc(1MHz~20MHz)
Total Harmonic Distortion <0.8%(20Hz ~ 20kHz, 0dBm)
Square Wave Signal Characteristics

Square Wave

Rise/Fall <20ns
Overshoot <5%
Duty Cycle freq<100kHz: 1%~99%;100kHz≤freq<5MHz: 20% ~ 80%;

5MHz≤freq: 40% ~ 60%(0.1% resolution)

Pulse Wave Characteristics

Pulse Wave

Pulse Width Min 20ns; 1ns resolution
Edge Transition Time Min 20ns;
Overshoot <5%
Jitter 6ns+0.1% Period
Ramp Wave Characteristics

Ramp Wave

Linearity Degree ≥98%(0.01Hz~10kHz)
Symmetry 0.0 ~ 100.0%(resolution 0.1%)
Output Characteristics
Amplitude

Amplitude Range

freq<10MHz

10MHz≤freq<30MHz

30MHz≤freq

2mVpp ~ 20Vpp

2mVpp ~10Vpp

2mVpp ~5Vpp

Amplitude Resolution

1mV

Amplitude Stability ±1% set value±1mVpp(1kHz Sine,0 offset,>10mVpp)
Amplitude Flatness (relative to 1K Sine, 1 Vpp) ±0.4dB  <10MHz ;±1.0dB  ≥10MHz。
Output Impedance 50Ω±10%(Typical)
Protection All the signal output terminal can be shorted within 60s
DC Offset
 

Output Amplitude>0.1V

2mV<Output Amplitude≤0.1V

Offset Adjusting Range

±10Vpk,ac + dc

±0.250Vpk,ac + dc

Offset Resolution 1mV
Phase characteristics
Phase Adjusting Range 0~359.9°
Phase Resolution 0.1°
External Measurement Function

Frequency Meter

Frequency measurementrange 1Hz ~ 100MHz
Measurement accuracy Gate time continuously adjusted between0.01s~10s

Counter Function

Counting region 0 ~ 4294967295
Control mode Manual operation
Input Signal Voltage Range  2Vpp~20Vpp
Coupled Mode AC or DC
Pulse Width Measurement  1ns (resolution), 20s (MAX measuring time)
Period Measurement  1ns (resolution), 20s (MAX measuring time)
SYNC Output
Output Channel CH1 or CH2, default CH1
Level TTL
Impedance 50Ω
Rise/Fall Time < 25ns  
Maximum Frequency 25MHz

AM Modulation

Output Channel CH1 or CH2, default CH1

Carrier Wave

Sine, square, ramp, pulse and arbitrary waveforms (excluding DC)

Source

Internal/External

Modulation Wave

Sine, square, triangle and ramp

Modulation Frequency

2mHz~20kHz

Modulation Depth

0%~120%

FM Modulation
Output Channel CH1 or CH2, default CH1

Carrier Wave

Sine, square, ramp, pulse and arbitrary waveforms (excluding DC)

Source

Internal/External

Modulation Wave

Sine, square, triangle and ramp

Modulation Frequency

2mHz~20kHz

Frequency Offset

0~Maximum carrier frequency

PM Modulation
Output Channel CH1 or CH2, default CH1

Carrier Wave

Sine, square, ramp, pulse and arbitrary waveforms (excluding DC)

Source

Internal/External

Modulation Wave

Sine, square, triangle and ramp

Modulation Frequency

2mHz~20kHz

Phase Offset

0°~ 360°

ASK Modulation
Output Channel CH1 or CH2, default CH1

Carrier Wave

Sine, square, ramp, pulse and arbitrary waveforms (excluding DC)

Source

Internal/External

Modulation Wave Square wave of 50% duty ratio

Keying Frequency

2mHz~1MHz

Modulation Amplitude

0~Carrier Amplitude

FSK Modulation
Output Channel CH1 or CH2, default CH1

Carrier Wave

Sine, square, ramp, pulse and arbitrary waveforms (excluding DC)

Source

Internal/External

Modulation Wave Square wave of 50% duty ratio

Keying Frequency

2mHz~1MHz

Hop Frequency

Carrier frequency range

PSK Modulation
Output Channel CH1 or CH2, default CH1

Carrier Wave

Sine, square, ramp, pulse and arbitrary waveforms (excluding DC)

Source

Internal/External

Modulation Wave Square wave of 50% duty ratio

Keying Frequency

2mHz~1MHz

Modulation Phase

0°~ 360°

Frequency Sweep
Output Channel CH1 or CH2, default CH1
Types Linearity/Logarithm
Sweep Frequency Time 1ms ~ 500.000s
Start/Stop Frequency 1µHz~Maximum carrier frequency
Sweep Direction Forward, Backward
Trigger Source Manual operating, internal, external

Burst Characteristics

Output Channel CH1 or CH2, default CH1

Carrier Wave

Sine, square, ramp, pulse and arbitrary waveforms (excluding DC)

Pulse Count

1~65535 or infinite, gated

Start/Stop Phase

0~360°

Internal Period

1μs~500s

Gating Source

External

Trigger Source Internal, external, manual operating

Trigger Input

Signal Range 2Vpp~20Vpp
Coupling AC or DC

Pulse Width

>100ns

Reaction Time

<500ns(Burst)

<10μs(Sweep)

Modulation Input

Impedance

1MΩ

Signal range

±2.5V ac+dc

 Supply voltage:220V±10%,45~65Hz,Or  110V±10%,45~65Hz

 Power consumption:< 15W

Types:3.5-inch TFT LCD screen,Resolution480×320,16M color

Environment:Operation 10 ℃ ~ +40 ℃、Non-operation -10℃~+60℃

Humidity range:Within the range of 0 ~ 40 ℃,≤90% relative humidity

Interface:RS232,USB Device;USB Host(optional)

 Display:3.5 inch TFT LCD screen, 480 x 320 resolution

Size:265 * 105 * 305 mm (width x height x deep)

 Weight:2.6 kg

Accessories

Standard accessories:

 1 piece of 30A51 three-wire power line;

 1 piece of 33A52 BNC coaxial cable;

 1 CD-ROM

 1User guide.


  • Previous:
  • Next:

  • Write your message here and send it to us