Wholesale ET44/ET45 Benchtop LCR Meter for Component Measurement Supplier and Factory

ET44/ET45 Benchtop LCR Meter for Component Measurement

Short Description:

ET44 and ET45 series LCR digital bridge is a component parameter analyzer based on the principle of automatic balancing bridge. Its 10Hz-100kHz test bandwidth, frequency continuous adjustable, 0.2% basic measurement accuracy and the file classification function provided by the instrument provide accurate and complete measurement and analysis for most components and materials, which are widely suitable. Used in product development, component inspection, product on-line inspection and other applications.

Send email to us

Product Detail

Product Tags

Product characteristics

¤ The highest measuring frequency is 100kHz, and the stepping; frequency is continuously adjustable at 1Hz;

¤ Test level 10~2000 mV, 1 mV step continuously adjustable;

¤ Supporting DC Resistance (DCR) and Electrolytic Capacitance Measurement;

¤ Internal bias voltage output 0mV~1500mV;

¤ 3.5-inch TFT display, 5-bit display;

¤ Data recording function (maximum, minimum, average);

¤ Supporting SCPI Communication Protocol;

¤ Provide system settings to configure Chinese or English, buzzer, screen brightness, etc;

¤ The basic measurement accuracy is 0.1%;

¤ Manual and automatic range;

¤ With open circuit and short circuit calibration function;

¤ Comparator sorting (5 gears), alarm function.

Main technical indicators

Model	ET4401	ET4402	ET4410	ET4501	ET4502	ET4510
Testing frequency	10 points (100, 120, 200, 400, 800, 1K, 2K, 4K, 8K, 10K)	12 points (100, 120, 200, 400, 800, 1K, 2K, 4K, 8K, 10K, 15K, 20K)	16 points (100, 120, 200, 400, 800, 1K, 2K, 4K, 8K, 10K, 15K, 20K, 40K, 50K, 80K, 100K)	10-10KHz continuous adjustable, 1Hz step[1]by-step	10-10KHz continuous adjustable, 1Hz step[1]by-step	10-100KHz continuous adjustable, 1Hz step by-step
Display screen	Display screen 3.5 inch TFT LCD
Number of display digits	Principal parameter: 5 digit，Secondary parameter: 5 digit
Measured parameter	Principal parameter: L/C/R/Z，Secondary parameter: X/D/Q/θ/ESR
Measurement Range	L：0.001μH～9999H
	C：0.001pF～99.999mF
	R：0.0001Ω～99.99MΩ
Basic accuracy	0.1%
Measuring display speed	2 time/s (slow), 4 times/s (medium), 8 time/s (fast)
Internal bias	0-1500mV adjustable, at a step of 1mV.
Testing level	Six fixed level(0.1V、0.3V、0.6V、1V、1.5V、2V)			0.01~2V adjustable, at a step of 1mV.
Signal source output impedance	30Ω、100Ω
Calibration function	Open circuit calibration, short circuit calibration
Screening function	The limit range of screening can be set to -50%～＋50%, and the fixed points are 1%, 5%, 10% and 20%.
Comparator	5 groups sorting,3 groups of qualified setting, one group of unqualified setting, one group of auxiliary setting
Interfaces	standard: RS232（or 485）, USB Device, Handler ;
Others	Support dc resistance (DCR), electrolytic capacitor measurement model,Adjustment of backlight brightness, Chinese and English are optional