Factory Supply Constant Current Load For Battery Testing - ET13 Programmable Bentop DC Electronic Load – Zhongchuang
Factory Supply Constant Current Load For Battery Testing - ET13 Programmable Bentop DC Electronic Load – Zhongchuang Detail:
¤ User-friendly Design:
It adopts 3.5-inch TFT LCD screen with rich display contents and supports Chinese and English display.
The operation process is simple and convenient, and with visual interface display system, it is easy to get started.
Key lock function to prevent misoperation.
¤ High-performance load.
It provides CC, CV, CR, CP and CC+CV, CR+CV several basic measurement modes.
It provides professional battery test.
It provides professional LED test.
The Tran test mode can test the dynamic output performance of the power supply.
The scan test mode can test the continuity of power output within a certain range.
Support 4-wire measurement.
The list test mode can simulate a variety of loading status changes.
The short circuit test can be used to simulate load short circuit.
Support external trigger input.
Built-in buzzer alarm.
Maintain data storage in case of power failure.
Remote operation via USB, RS-232or 485 (optional) interfaces.
¤ Multiple safety protection:
It provides overcurrent, overvoltage, overpower, over temperature protection. The overvoltage and overcurrent parameters can be
set flexibly, so as to effectively protect the load;
It has intelligent fan speed control function, which can effectively reduce the fan noise when it is working.
With input polarity reverse prompt;
Model |
ET1300 |
ET1301 |
|||
Rated input |
Power |
400W |
|||
Input voltage |
0-150V |
||||
Input current |
0-40A |
0-60A |
|||
CV mode |
Range |
0.1~19.999V,0.1~150.00V |
|||
Resolution |
1mV,10mV |
||||
Accuracy |
±(0.05%+0.02%FS) |
||||
CC mode |
Range |
0~3.000A,0~40.00A |
0~6.00A,0~60.00A |
||
Resolution |
1mA,10mA |
||||
Accuracy |
±(0.05%+0.05%FS) |
||||
CR mode |
Range |
0.05Ω~1kΩ,1kΩ~4.5kΩ |
|||
Resolution |
10mΩ,100mΩ |
||||
Accuracy |
±(0.1%+0.5%FS) |
||||
CP mode |
Range |
0~400W |
|||
Resolution |
10mW |
||||
Accuracy |
±(0.1%+0.5%FS) |
||||
Tran Test |
Mode |
CC, CV |
|||
T1&T2 |
50ms~60s; |
||||
Battery Test |
Accuracy |
CC, CR |
|||
Discharge mode |
9999Ah |
||||
Maximum discharge capacity |
1mA, 10mA, 10mΩ, 100mΩ |
||||
Range of measurement |
|||||
Voltage read-back value |
Range |
0~19.999V, 0 ~150.00V |
|||
Resolution |
1mV,10mV |
||||
Accuracy |
±(0.05%+0.1%FS) |
||||
Current read-back value |
Range |
0~3.000A,0~40.00A |
0~6.00A,0~60.00A |
||
Resolution |
1mA,10mA |
||||
Accuracy |
±(0.05%+0.1%FS) |
||||
Power read-back value |
Range |
400W |
|||
Resolution |
10mW |
||||
Accuracy |
±(0.1%+0.5%FS) |
||||
Scope of protection |
|||||
Overvoltage protection |
>21V or 155V overvoltage protection |
||||
Overcurrent protection |
>3.1A or 41A input cut off |
>6.1A or 61A input cut off |
|||
Overpower protection |
410W |
||||
Over-temperature protection |
85℃ |
Model |
ET1302 |
ET1303 |
|||
Rated input
|
Power |
400W |
|||
Input voltage |
0-500V |
||||
Input current |
0-15A |
0-30A |
|||
CV mode |
Range |
0.1~19.999V,0.1~500.00V |
|||
Resolution |
1mV,10mV |
||||
Accuracy |
±(0.05%+0.02%FS) |
||||
CC mode |
Range |
0~3.000A,0~15.00A |
0~3.000A,0~30.00A |
||
Resolution |
1mA,10mA |
||||
Accuracy |
±(0.05%+0.05%FS) |
||||
CR mode |
Range |
0.05Ω~1kΩ, 1kΩ~4.5kΩ |
|||
Resolution |
10mΩ, 100mΩ |
||||
Accuracy |
±(0.1%+0.5%FS) |
||||
CP mode |
Range |
0~400W |
|||
Resolution |
10mW |
||||
Accuracy |
±(0.1%+0.5%FS) |
||||
Tran Test |
Mode |
CC, CV |
|||
T1&T2 |
50ms~60s; |
||||
Battery Test |
Accuracy |
CC, CR |
|||
Discharge mode |
9999Ah |
||||
Maximum discharge capacity |
1mA, 10mA, 10mΩ, 100mΩ |
||||
Range of measurement |
|||||
Voltage read-back value |
Range |
0~19.999V, 0 ~500.00V |
|||
Resolution |
1mV, 10mV |
||||
Accuracy |
±(0.05%+0.1%FS) |
||||
Current read-back value |
Range |
0~3.000A, 0~15.00A |
0~3.00A, 0~30.00A |
||
Resolution |
1mA, 10mA |
||||
Accuracy |
±(0.05%+0.1%FS) |
||||
Power read-back value |
Range |
400W |
|||
Resolution |
10mW |
||||
Accuracy |
±(0.1%+0.5%FS) |
||||
Scope of protection |
|||||
Overvoltage protection |
>21V or 510V overvoltage protection |
||||
Overcurrent protection |
>3.1A or 16A input cut off |
>3.1A or 31A input cut off |
|||
Overpower protection |
410W |
||||
Over-temperature protection |
85℃ |
Model |
ET1304 |
||
Rated input |
Power |
400W(200W*2) |
|
Input voltage |
0-150V |
||
Input current |
0-60A(30A*2) |
||
CV mode |
Range |
0.1~19.999V, 0.1~500.00V |
|
Resolution |
1mV, 10mV |
||
Accuracy |
±(0.05%+0.02%FS) |
||
CC mode |
Range |
0~3.000A,0~30.00A |
|
Resolution |
1mA, 10mA |
||
Accuracy |
±(0.05%+0.05%FS) |
||
CR mode |
Range |
0.05Ω~1kΩ, 1kΩ~4.5kΩ |
|
Resolution |
10mΩ, 100mΩ |
||
Accuracy |
±(0.1%+0.5%FS) |
||
CP mode |
Range |
0~200W |
|
Resolution |
10mW |
||
Accuracy |
±(0.1%+0.5%FS) |
||
Tran Test |
Mode |
CC, CV |
|
T1&T2 |
50ms~60s; |
||
Battery Test |
Accuracy |
CC, CR |
|
Discharge mode |
9999Ah |
||
Maximum discharge capacity |
1mA, 10mA, 10mΩ, 100mΩ |
||
Range of measurement |
|||
Voltage read-back value |
Range |
0~19.999V, 0 ~150.00V |
|
Resolution |
1mV, 10mV |
||
Accuracy |
±(0.05%+0.1%FS) |
||
Current read-back value |
Range |
0~3.00A, 0~30.00A |
|
Resolution |
1mA, 10mA |
||
Accuracy |
±(0.05%+0.1%FS) |
||
Power read-back value |
Range |
200W |
|
Resolution |
10mW |
||
Accuracy |
±(0.1%+0.5%FS) |
||
Scope of protection |
|||
Overvoltage protection |
>21V or 155V overvoltage protection |
||
Overcurrent protection |
>3.1A or 31A input cut off |
||
Overpower protection |
210W |
||
Over-temperature protection |
85℃ |
Product detail pictures:
Related Product Guide:
Dedicated to strict high-quality management and considerate shopper company, our experienced team associates are normally available to discuss your requirements and ensure full shopper gratification for Factory Supply Constant Current Load For Battery Testing - ET13 Programmable Bentop DC Electronic Load – Zhongchuang , The product will supply to all over the world, such as: New York, Israel, Iceland, Based on our automatic production line, steady material purchase channel and quick subcontract systems have been built in mainland China to meet customer's wider and higher requirement in recent years. We are looking forward to cooperating with more clients worldwide for common development and mutual benefit!Your trust and approval are the best reward for our efforts. Keeping honest, innovative and efficient, we sincerely expect that we can be business partners to create our brilliant future!
By Sharon from Borussia Dortmund - 2017.10.27 12:12
The after-sale warranty service is timely and thoughtful, encounter problems can be resolved very quickly, we feel reliable and secure.
By Dana from Ghana - 2018.08.12 12:27