High Quality Signal Generator - ET33 Series Arbitrary Waveorm Function Signal Generator – Zhongchuang
High Quality Signal Generator - ET33 Series Arbitrary Waveorm Function Signal Generator – Zhongchuang Detail:
¤ The 3.5 inch 480×320 TFT LCD screen has a clear graphical interface.
¤ Support menu in Chinese and English.
¤ Dual channel output, maximum output frequency 70MHz.
¤ The two channels are independent of each other and have phase synchronization function.
¤ 160MSa/S sampling rate, 12 bit vertical resolution, 16K storage depth.
¤ Built in 5 basic waveforms and 60 arbitrary waveforms.
¤ Waveform storage: supporting 10 sets of user defined editing waveforms.
¤ The pulse wave output at the edge time can be set.
¤ Internal / external AM, FM, FSK, PM, ASK, PSK modulation function.
¤ Output of linear / logarithmic sweep and pulse train waveform.
¤ High precision frequency meter with 200MHz.
¤ It has RS232 interface, USB Device, USB Host interface, GPIB (optional), supports U disk storage.
¤ Equipped with multi-function arbitrary waveform editing software.
¤ Supply voltage: 220V.AC±10%, or 110V.AC ±10% (optional), 45~65Hz.
¤ Power consumption: <40W.
¤ Display: 3.5 inch TFT LCD screen, resolution 480 x 320, color 16M color.
¤ Temperature range: operating state 10℃ ~+40℃ , non operating -10℃ ~+60℃ .
¤ Chumidity range: 0~40℃, less than 90% relative humidity.
¤ Interface: RS232, USB Host, USB Device, GPIB (matching).
¤ Size: 265 x 105 x 305mm (wide * high * Deep).
¤ Weight:2.6kg.
Matching Accessories
¤ One three-core power cord.
¤ Two power fuses.
¤ 1 user manual.
Optional Accessories
¤ CD.
¤ USB cable.
¤ RS232/485 cable.
¤ The output line.
| Frequency Characteristics | ||||||
|
Model |
ET3310 |
ET3325 |
ET3340 |
ET3360 |
ET3370 |
|
|
Waveform types |
Sine, square, triangle, pulse, noise and arbitrary waves (including DC) |
|||||
|
Sine |
1uHz ~ 10MHz |
1uHz ~ 25MHz |
1uHz ~ 40MHz |
1uHz ~ 60MHz |
1uHz ~ 70MHz |
|
|
Square |
1uHz ~ 5MHz |
1uHz ~ 5MHz |
1uHz ~ 10MHz |
1uHz ~ 10MHz |
1uHz ~ 10MHz |
|
|
Triangle |
1uHz ~ 500kHz |
1uHz ~ 500kHz |
1uHz ~ 1MHz |
1uHz ~ 2MHz |
1uHz ~ 2MHz |
|
|
Noise (-3dB) |
7MHz Bandwidth |
|||||
|
Pulse |
100uHz ~ 5MHz |
100uHz ~ 10MHz |
||||
|
Arbitrary wave |
1uHz ~ 5MHz |
1uHz ~ 10MHz |
||||
|
Frequency Resolution |
1uHz |
|||||
|
Frequency Accuracy |
±5ppm |
|||||
| Sine Wave Characteristics |
CH1 |
CH2 |
||||
|
Harmonic distortion(>1Vpp) |
0~1MHz: <-45dBc;1MHz~10MHz: <-40dBc;10MHz~20MHz: <-30dBc 20MHz~40MHz: <-25dBc;40MHz~70MHz: <-20dBc |
0~1MHz: <-45dBc 1MHz~40MHz: <-40dBc;40MHz~70MHz: <-35dBc |
||||
| Total harmonic distortion |
<0.2% (20Hz-20kHz, 1Vpp) |
|||||
| Square Wave Signal Characteristics | ||||||
|
Rise/fall Time |
<20ns |
|||||
|
Overshoot |
<5% |
|||||
|
Duty cycle |
≤100kHz: 1%~99%;≤5MHz: 20%~80%;≤10MHz: 40%~60% (0.1% resolution) |
|||||
|
Dissymmetry(50% duty cycle) |
1% Period + 5ns |
|||||
|
Jitter |
6ns +0.1% Period |
|||||
| Ramp Wave Characteristics | ||||||
|
Linearity degree |
≤0.1% Peak output |
|||||
|
Symmetry |
0.0~100.0%(resolution 0.1%) |
|||||
| Pulse Wave Characteristics | ||||||
| Pulse width | Min 20ns;1ns resolution | |||||
| Edge transition time | Min 20ns | |||||
| Overshoot | <5% | |||||
| Jitter | 6ns +0.1% Period | |||||
| Arbitrary Wave Characteristics | CH1 | CH12 | ||||
| Sampling speed | 160MSa/S | 160MSa/S | ||||
| Waveform amplitude resolution | 12bits | 10bits | ||||
| Waveform length | 16k | 4k | ||||
| Minimum rise/fall time | <20ns | <20ns | ||||
| Jitter | 6ns+30ppm | 6ns+30ppm | ||||
| Storage quantity | 10 waveforms | 10 waveforms | ||||
| Output Characteristics | ||||||
|
Amplitude (50Ω) |
||||||
|
Range |
1mVpp~10Vpp ≤20MHz;1mVpp~5Vpp >20MHz |
1mVpp~3Vpp ≤20MHz |
||||
|
Accuracy |
±1% set value ±1mVpp(1kHz Sine,0 offset,>10mVpp) |
|||||
|
Resolution |
1mV or 3 bit |
|||||
|
Flatness(relative to 1K Sine, 1 Vpp) |
±0.1dB,≤100kHz;±0.3dB,≤5MHz;±0.4dB,≤25MHz;±1dB,≤70MHz |
±0.1dB,≤100kHz;±0.2dB,≤5MHz;±2dB, ≤40MHz;±5dB,≤70MHz |
||||
|
Offset (50Ω) |
||||||
|
Range |
±5Vpk ,ac + dc |
±1.5Vpk ,ac + dc |
||||
|
Accuracy |
±(1% set value +5mV+0.5% amplitude) |
|||||
|
Output impedance |
50Ω |
|||||
|
Protection |
Short circuit protection, automatically disables the waveform output when overloading |
|||||
| SYNC Output | ||||||
|
Level |
TTL compatibility |
|||||
|
Impedance |
50Ω |
|||||
|
Rise/fall time |
<25ns; |
|||||
|
Maximum frequency |
25MHz |
|||||
| AM Modulation (CH1) | ||||||
|
Carrier wave |
Sine, square, ramp, pulse and arbitrary waveforms (excluding DC) |
|||||
|
Source |
Internal/external |
|||||
|
Modulation wave |
Sine, square, triangle and ramp |
|||||
|
Modulation frequency |
2mHz~20kHz |
|||||
|
Modulation depth |
0%~120% |
|||||
| FM Modulation (CH1) | ||||||
|
Carrier wave |
Sine, square, ramp, pulse and arbitrary waveforms (excluding DC) |
|||||
|
Source |
Internal/external |
|||||
|
Modulation wave |
Sine, square, triangle and ramp |
|||||
|
Modulation frequency |
2mHz~20kHz |
|||||
|
Frequency offset |
0~Maximum carrier frequency |
|||||
| FSK Modulation (CH1) | ||||||
|
Carrier wave |
Sine, square, ramp, pulse or arbitrary waveforms (excluding DC) |
|||||
|
Source |
Internal/external |
|||||
|
Modulation wave |
Square wave of 50% duty ratio |
|||||
|
Keying frequency |
2mHz~1MHz |
|||||
| Frequency Sweep (CH1) | ||||||
|
Carrier wave |
Sine, square, ramp, pulse and arbitrary waveforms (excluding DC) |
|||||
|
Types |
Linearity/Logarithm |
|||||
|
Start/Stop Frequency |
1uHz~Maximum carrier frequency |
|||||
|
Sweep frequency time |
1ms~500s |
|||||
|
Trigger source |
Manual operating, internal, external |
|||||
| Burst characteristics (CH1) | ||||||
|
Carrier wave |
Sine, square, ramp, pulse, noise and arbitrary waveforms (excluding DC) |
|||||
|
Pulse count |
1~65535 or infinite, gated |
|||||
|
Start/stop phase |
0~360° |
|||||
|
Internal period |
1us~500s |
|||||
|
Gating source |
External |
|||||
|
Trigger source |
Internal, external, manual operating |
|||||
| Frequency Meter | ||||||
|
Frequency range |
1Hz~160MHz |
|||||
|
Frequency resolution |
6 bit/s |
|||||
|
Voltage range and sensitivity |
100mVpp~5Vpp |
|||||
|
Input adjustment |
Input impedance:1MΩ |
|||||
|
Coupled modes:AC |
||||||
| Trigger Input | ||||||
|
Level |
TTL compatibility |
|||||
|
Slope |
Rise/Fall |
|||||
|
Pulse width |
>100ns |
|||||
|
Reaction time |
<500ns(burst) |
|||||
|
<10us(sweep frequency) |
||||||
| Modulation Input | ||||||
|
Impedance |
1MΩ |
|||||
|
Signal range |
±5V ac + dc |
|||||
Product detail pictures:
Related Product Guide:
Our items are commonly identified and trusted by people and can fulfill repeatedly altering economic and social wants of High Quality Signal Generator - ET33 Series Arbitrary Waveorm Function Signal Generator – Zhongchuang , The product will supply to all over the world, such as: Marseille, Johor, UAE, We will not only continuously introduce technical guidance of experts from both home and abroad, but also develop the new and advanced products constantly to satisfactorily meet the needs of our clients all over the world.
By Eudora from Dominica - 2017.06.22 12:49
The factory has advanced equipment, experienced staffs and good management level, so product quality had assurance, this cooperation is very relaxed and happy!
By Nydia from Plymouth - 2018.06.09 12:42
Products categories
-
Factory source Dual Dc Power Supply - ET37 Ser...
-
2020 High quality Electronics Load - ET13 Pro...
-
China wholesale Meter Field Calibrator - ET278...
-
Factory Supply Constant Current Load For Batter...
-
PriceList for Thermocouple Calibration Furnace ...
-
OEM Factory for Pc Power Supply - ET37 Series ...