OEM/ODM China Sine Wave Signal Generator - ET33 Series Arbitrary Waveorm Function Signal Generator – Zhongchuang
OEM/ODM China Sine Wave Signal Generator - ET33 Series Arbitrary Waveorm Function Signal Generator – Zhongchuang Detail:
¤ The 3.5 inch 480×320 TFT LCD screen has a clear graphical interface.
¤ Support menu in Chinese and English.
¤ Dual channel output, maximum output frequency 70MHz.
¤ The two channels are independent of each other and have phase synchronization function.
¤ 160MSa/S sampling rate, 12 bit vertical resolution, 16K storage depth.
¤ Built in 5 basic waveforms and 60 arbitrary waveforms.
¤ Waveform storage: supporting 10 sets of user defined editing waveforms.
¤ The pulse wave output at the edge time can be set.
¤ Internal / external AM, FM, FSK, PM, ASK, PSK modulation function.
¤ Output of linear / logarithmic sweep and pulse train waveform.
¤ High precision frequency meter with 200MHz.
¤ It has RS232 interface, USB Device, USB Host interface, GPIB (optional), supports U disk storage.
¤ Equipped with multi-function arbitrary waveform editing software.
¤ Supply voltage: 220V.AC±10%, or 110V.AC ±10% (optional), 45~65Hz.
¤ Power consumption: <40W.
¤ Display: 3.5 inch TFT LCD screen, resolution 480 x 320, color 16M color.
¤ Temperature range: operating state 10℃ ~+40℃ , non operating -10℃ ~+60℃ .
¤ Chumidity range: 0~40℃, less than 90% relative humidity.
¤ Interface: RS232, USB Host, USB Device, GPIB (matching).
¤ Size: 265 x 105 x 305mm (wide * high * Deep).
¤ Weight:2.6kg.
Matching Accessories
¤ One three-core power cord.
¤ Two power fuses.
¤ 1 user manual.
Optional Accessories
¤ CD.
¤ USB cable.
¤ RS232/485 cable.
¤ The output line.
| Frequency Characteristics | ||||||
|
Model |
ET3310 |
ET3325 |
ET3340 |
ET3360 |
ET3370 |
|
|
Waveform types |
Sine, square, triangle, pulse, noise and arbitrary waves (including DC) |
|||||
|
Sine |
1uHz ~ 10MHz |
1uHz ~ 25MHz |
1uHz ~ 40MHz |
1uHz ~ 60MHz |
1uHz ~ 70MHz |
|
|
Square |
1uHz ~ 5MHz |
1uHz ~ 5MHz |
1uHz ~ 10MHz |
1uHz ~ 10MHz |
1uHz ~ 10MHz |
|
|
Triangle |
1uHz ~ 500kHz |
1uHz ~ 500kHz |
1uHz ~ 1MHz |
1uHz ~ 2MHz |
1uHz ~ 2MHz |
|
|
Noise (-3dB) |
7MHz Bandwidth |
|||||
|
Pulse |
100uHz ~ 5MHz |
100uHz ~ 10MHz |
||||
|
Arbitrary wave |
1uHz ~ 5MHz |
1uHz ~ 10MHz |
||||
|
Frequency Resolution |
1uHz |
|||||
|
Frequency Accuracy |
±5ppm |
|||||
| Sine Wave Characteristics |
CH1 |
CH2 |
||||
|
Harmonic distortion(>1Vpp) |
0~1MHz: <-45dBc;1MHz~10MHz: <-40dBc;10MHz~20MHz: <-30dBc 20MHz~40MHz: <-25dBc;40MHz~70MHz: <-20dBc |
0~1MHz: <-45dBc 1MHz~40MHz: <-40dBc;40MHz~70MHz: <-35dBc |
||||
| Total harmonic distortion |
<0.2% (20Hz-20kHz, 1Vpp) |
|||||
| Square Wave Signal Characteristics | ||||||
|
Rise/fall Time |
<20ns |
|||||
|
Overshoot |
<5% |
|||||
|
Duty cycle |
≤100kHz: 1%~99%;≤5MHz: 20%~80%;≤10MHz: 40%~60% (0.1% resolution) |
|||||
|
Dissymmetry(50% duty cycle) |
1% Period + 5ns |
|||||
|
Jitter |
6ns +0.1% Period |
|||||
| Ramp Wave Characteristics | ||||||
|
Linearity degree |
≤0.1% Peak output |
|||||
|
Symmetry |
0.0~100.0%(resolution 0.1%) |
|||||
| Pulse Wave Characteristics | ||||||
| Pulse width | Min 20ns;1ns resolution | |||||
| Edge transition time | Min 20ns | |||||
| Overshoot | <5% | |||||
| Jitter | 6ns +0.1% Period | |||||
| Arbitrary Wave Characteristics | CH1 | CH12 | ||||
| Sampling speed | 160MSa/S | 160MSa/S | ||||
| Waveform amplitude resolution | 12bits | 10bits | ||||
| Waveform length | 16k | 4k | ||||
| Minimum rise/fall time | <20ns | <20ns | ||||
| Jitter | 6ns+30ppm | 6ns+30ppm | ||||
| Storage quantity | 10 waveforms | 10 waveforms | ||||
| Output Characteristics | ||||||
|
Amplitude (50Ω) |
||||||
|
Range |
1mVpp~10Vpp ≤20MHz;1mVpp~5Vpp >20MHz |
1mVpp~3Vpp ≤20MHz |
||||
|
Accuracy |
±1% set value ±1mVpp(1kHz Sine,0 offset,>10mVpp) |
|||||
|
Resolution |
1mV or 3 bit |
|||||
|
Flatness(relative to 1K Sine, 1 Vpp) |
±0.1dB,≤100kHz;±0.3dB,≤5MHz;±0.4dB,≤25MHz;±1dB,≤70MHz |
±0.1dB,≤100kHz;±0.2dB,≤5MHz;±2dB, ≤40MHz;±5dB,≤70MHz |
||||
|
Offset (50Ω) |
||||||
|
Range |
±5Vpk ,ac + dc |
±1.5Vpk ,ac + dc |
||||
|
Accuracy |
±(1% set value +5mV+0.5% amplitude) |
|||||
|
Output impedance |
50Ω |
|||||
|
Protection |
Short circuit protection, automatically disables the waveform output when overloading |
|||||
| SYNC Output | ||||||
|
Level |
TTL compatibility |
|||||
|
Impedance |
50Ω |
|||||
|
Rise/fall time |
<25ns; |
|||||
|
Maximum frequency |
25MHz |
|||||
| AM Modulation (CH1) | ||||||
|
Carrier wave |
Sine, square, ramp, pulse and arbitrary waveforms (excluding DC) |
|||||
|
Source |
Internal/external |
|||||
|
Modulation wave |
Sine, square, triangle and ramp |
|||||
|
Modulation frequency |
2mHz~20kHz |
|||||
|
Modulation depth |
0%~120% |
|||||
| FM Modulation (CH1) | ||||||
|
Carrier wave |
Sine, square, ramp, pulse and arbitrary waveforms (excluding DC) |
|||||
|
Source |
Internal/external |
|||||
|
Modulation wave |
Sine, square, triangle and ramp |
|||||
|
Modulation frequency |
2mHz~20kHz |
|||||
|
Frequency offset |
0~Maximum carrier frequency |
|||||
| FSK Modulation (CH1) | ||||||
|
Carrier wave |
Sine, square, ramp, pulse or arbitrary waveforms (excluding DC) |
|||||
|
Source |
Internal/external |
|||||
|
Modulation wave |
Square wave of 50% duty ratio |
|||||
|
Keying frequency |
2mHz~1MHz |
|||||
| Frequency Sweep (CH1) | ||||||
|
Carrier wave |
Sine, square, ramp, pulse and arbitrary waveforms (excluding DC) |
|||||
|
Types |
Linearity/Logarithm |
|||||
|
Start/Stop Frequency |
1uHz~Maximum carrier frequency |
|||||
|
Sweep frequency time |
1ms~500s |
|||||
|
Trigger source |
Manual operating, internal, external |
|||||
| Burst characteristics (CH1) | ||||||
|
Carrier wave |
Sine, square, ramp, pulse, noise and arbitrary waveforms (excluding DC) |
|||||
|
Pulse count |
1~65535 or infinite, gated |
|||||
|
Start/stop phase |
0~360° |
|||||
|
Internal period |
1us~500s |
|||||
|
Gating source |
External |
|||||
|
Trigger source |
Internal, external, manual operating |
|||||
| Frequency Meter | ||||||
|
Frequency range |
1Hz~160MHz |
|||||
|
Frequency resolution |
6 bit/s |
|||||
|
Voltage range and sensitivity |
100mVpp~5Vpp |
|||||
|
Input adjustment |
Input impedance:1MΩ |
|||||
|
Coupled modes:AC |
||||||
| Trigger Input | ||||||
|
Level |
TTL compatibility |
|||||
|
Slope |
Rise/Fall |
|||||
|
Pulse width |
>100ns |
|||||
|
Reaction time |
<500ns(burst) |
|||||
|
<10us(sweep frequency) |
||||||
| Modulation Input | ||||||
|
Impedance |
1MΩ |
|||||
|
Signal range |
±5V ac + dc |
|||||
Product detail pictures:
Related Product Guide:
abide by the contract", conforms to the market requirement, joins in the market competition by its high quality as well as provides more comprehensive and excellent service for clients to let them become big winner. The pursue of the company, is the clients' satisfaction for OEM/ODM China Sine Wave Signal Generator - ET33 Series Arbitrary Waveorm Function Signal Generator – Zhongchuang , The product will supply to all over the world, such as: Mexico, Cologne, Norway, After years' creating and developing, with the advantages of trained qualified talents and rich marketing experience, outstanding achievements were gradually made. We get good reputation from the customers due to our good products quality and fine after-sale service. We sincerely wish to create a more prosperous and flourishing future together with all the friends home and abroad!
By Jo from Costa rica - 2018.06.28 19:27
The product manager is a very hot and professional person, we have a pleasant conversation, and finally we reached a consensus agreement.
By Joyce from belarus - 2018.06.21 17:11
Products categories
-
Manufacturer for Lcr Bridge - ET1090/ET1091 Be...
-
Hot New Products battery capacity tester batter...
-
Chinese Professional Pressure Meter Calibration...
-
High definition Dry Block Temperature Calibrato...
-
8 Year Exporter Dc Input Power Supply - ET54 s...
-
Professional China Electronic Signal Generator ...